Lenovo x3250 m6 Installation And Service Manual page 116

• Check the instructions that come with the drive to determine whether you have to set any switches or
jumpers on the drive. If you are installing a SAS or SATA hard disk drive, be sure to set the SAS or
SATA ID for that device.
• You can install up to eight 2.5-inch or four 3.5-inch hot-swap SAS or SATA hard disk drives in the server.
• The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays
and PCI and PCI Express slots covered or occupied. When you install a drive, save the EMC shield and
filler from the bay in case you later remove the device.
• For a complete list of supported optional devices for the server, go to:
http://www.lenovo.com/ serverproven/
To install a hot-swap hard disk drive, do the following:
Step 1. Remove the security bezel. See "Removing the security bezel" on page 91.
Step 2. Touch the static-protective package that contains the drive to any unpainted metal surface on the
server. Then, remove the drive from the package and place it on a static-protective surface.
102
Lenovo System x3250 M6 Installation and Service Guide