Bedienungselemente; Pedal - Pfaff Element 1050 series Supplement To Instruction Manual

Bedienungselemente

2 Control elements
2 Control device for remaining bobbin thread
.01
2

Pedal

.02
2 - 1
Fig. 2 - 01
- 1
- 2
Fig. 2 - 02
Bobbin thread monitor
When the use of the last amount of
the remaining thread supply begins, the
LED 1 starts flashing.
When the remaining thread supply has
been used up, the LED 1 lights up
permanently until the bobbin has been
changed.
Bobbin thread counter
When the thread counter reaches its end,
the LED 1 starts flashing.
If sewing continues without the bobbin
being changed, the LED 1 remains on
1
permanently until the bobbin is changed.
0 = Neutral position
1 = Sewing
2 = Raise presser foot
3 = Trim sewing threads / reset
0
bobbin thread monitor or bob
bin thread counter
+ 1
To select thread monitoring or
thread counting see Chapter
5.03 Parameter settings.