Samsung 6 Series User Manual page 13

• When the receiver (home theatre) is set to on, you can hear sound output from the 1V's optical jack.
When the 1V is receiving a D1V signal, the 1V will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD player/ Blu-ray player/ cable box / STB
(Set-Top-Box) satellite receiver and you connected it to the 1V via HDMI, you will only hear 2 CH
audio from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio
out jack from your DVD / Blu-ray player/ cable box / STB satellite receiver directly to an amplifier or
home theatre.
~
Headphones
O:
You can connect your headphones to the headphones output on your set. While
the headphones are connected, the sound from the built-in speakers will be disabled.
• Sound function may be restricted when connecting headphones to the 1V.
• Headphone volume and 1V volume are adjusted separately.
• The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.