When Using A Display Con- Nected To V Out; To Avoid Battery Exhaustion; Rear View Camera; Handling The Sd Card Slot - Pioneer AVH-X8790BT Owner's Manual

Dvd rds av receiver
Hide thumbs Also See for AVH-X8790BT:
Table of Contents

Advertisement

Chapter
video image on this display, stop the vehicle
01
in a safe place and apply the handbrake.
Please keep the brake pedal pushed down
before releasing the handbrake.
When using a display con-
nected to V OUT
The video output terminal (V OUT) is for
connection of a display to enable passen-
gers in the rear seats to watch video images.
WARNING
NEVER install the rear display in a location
that enables the driver to watch video
images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using
this product. Using this product without
running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that
does not have an ACC wire or circuitry
available.

Rear view camera

With an optional rear view camera, you are
able to use this product as an aid to keep
an eye on trailers, or backing into a tight
parking spot.
WARNING
SCREEN IMAGE MAY APPEAR
REVERSED.
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
For safety reasons, the rear view camera
function is not available until this prod-
uct boots up completely.
The rear view mode is to use this product
as an aid to keep an eye on the trailers,
or while backing up. Do not use this
function for entertainment purposes.
6
Engb

Handling the SD card slot

CAUTION
Keep the SD memory card out of the
reach of small children to prevent them
from accidentally swallowing it.
To prevent data loss and damage to the
storage device, never remove it from this
product while data is being transferred.
If data loss or corruption occurs on
the storage device for any reason, it is
usually not possible to recover the data.
Pioneer accepts no liability for damages,
costs or expenses arising from data loss
or corruption.
Never insert or eject an SD memory card
while driving.

Handling the USB connector

CAUTION
To prevent data loss and damage to the
storage device, never remove it from this
product while data is being transferred.
Pioneer cannot guarantee compatibility
with all USB mass storage devices and
assumes no responsibility for any loss
of data on media players, iPhone, smart-
phone, or other devices while using this
product.

Visit our website

Visit us at the following site:
http://www.pioneer-india.in
We offer the latest information about
PIONEER CORPORATION on our website.
Pioneer regularly provides software
updates to further improve it's products.
Please check the support section of the
Pioneer website for all available software
updates.
Protecting the LCD panel and
screen
p Do not expose the LCD screen to direct
sunlight when this product is not
used. This may result in LCD screen
malfunction due to the resulting high
temperatures.
p When using a mobile phone, keep the
aerial of the mobile phone away from
the LCD screen to prevent disruption of
the video in the form of spots, coloured
stripes, etc.
p To protect the LCD screen from damage,
be sure to touch the touch panel keys
only with your finger and do so gently.

Notes on internal memory

■ Before removing the vehicle
battery
p Some of the settings and recorded con-
tents will not be reset.

■ Data subject to erasure

The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p Some of the settings and recorded con-
tents will not be reset.

■ Resetting the microprocessor

CAUTION
Pressing the RESET button resets set-
tings and recorded contents to the factory
settings.
p Do not perform this operation when a
device is connected to this product.
p Some of the settings and recorded
contents will not be reset.
The microprocessor must be reset under the
following conditions:
Prior to using this product for the first
time after installation.
If this product fails to operate properly.
If there appears to be problems with the
operation of the system.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen
tip or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
1
1 RESET button

About this manual

This manual uses diagrams of actual
screens to describe operations. However,
the screens on some units may not match
those shown in this manual depending on
the model used.
Use and care of the remote
control

■ Installing the battery

Slide the tray on the back of the remote con-
trol out and insert the battery with the plus
(+) and minus (–) poles aligned properly.
When using for the first time, pull out the
film protruding from the tray.
WARNING
Keep the battery out of the reach of chil-
dren. Should the battery be swallowed,
consult a doctor immediately.
Batteries (battery pack or batteries
installed) must not be exposed to exces-
sive heat such as sunshine, fire or the
like.
CAUTION
Remove the battery if the remote control
is not used for a month or longer.

Advertisement

Table of Contents
loading

Table of Contents