Operation Instruction; Product Features - Electrolux EYL85066BT User Manual

b. Assemble the soap tray holder from the
bottom of the sliding rail as Fig. 12 shown.
Fig. 12
c. Assemble the soap tay on the soap tray
holder.
d. Place the sliding rail between the holders
and x the sliding rail by xing the lower
holder as Fig. 13 shown.

6. OPERATION INSTRUCTION

6.1

Product features

1
Water temperature indicator
This indicator indicate the setting water
temperature and error code. For the
error code please refer to helpful hints
and tips section (page 21).
2
Water temperature adjuster
This section is used to select the
desired water temperature. The water
temperature can be adjusted within the
range of 30 C to 46 C.
Fig. 13
Point the open
gap upward
1
3
2
3
4
4
NOTE: When you press the On/off button
to start the unit water start to ow out from
the showerhead. To avoid too hot or too
cold water ow, do not let showerhead
point directly to human body.
The larger hole should
be pointed outside
When rotate the water temperature
adjuster anti-clockwise to the minimum
position " ", the shower will stop heating
and the temperature indicator will indicate
the actual temperature.
Water ow controler
The water ow knob is used to
increase/decrease the water ow.
- Clockwise rotate, decrease water
ow.
- Anti-clockwise rotate, increase water
ow.
On/off button
Control the shower unit's electricity
and working start/stop, when push on,
water owe out, when push off, water
stops.
ENGLISH 17