Olevia ZMT-620FTA User Manual page 7

更新完成第一部份後, ZMT-620FTA 會自動重新啟動.
9.
OLEVIA ZMT 620-FTA will reboot automatically after part 1.
注意:ZMT-620FTA
10.
止.
Attention: The upgrade has not been finished; please continue the following steps
until the upgrade complete.
從新開機後,請選擇以英文作為設定語言,並繼續以下程序.
Please select English
11. 請按遙控器上的 "Menu" ,在 "Main Menu" 下選擇 "System" 然後再選擇
"Information".
Press "Menu" on the remote and select "Information" under "System".
12. 這時請按遙控器上的紅色鍵.
Press the red button on the remote for upgrading the firmware.
的升級程序仍未完成,請繼續以下之步驟,直至完全升級為
as the language for the following process.