Page 1
GB – Gas Teppanyaki Jumbo Grill Installation, Operation and Maintenance Instructions Gas Teppanyaki Jumbo Grill Model : TP-JG-12/G 420 Two Gas Burners SS Griddle Plate and Food Pan TP-JG-12/G P 420 Two Gas Burners-Portable SS Griddle Plate and Oil Drip Pan...
Thank you for choosing our product as your trusted partner. We ensure you that we always give our best as we produce this appliance by using the finest materials. NAYATI Gas Teppanyaki Jumbo Grill is excellent choice to cook. In order to obtain maximum benefits of this appliance, please read this manual instruction carefully.
Dangerous situation → Non-observance can lead to slight or semi-serious injury (caused by hot surface) Warning Damage → Non-observance can lead damage Pace Maker (Especially for Induction) Possible Danger → Non-observance can lead to death or serious injury NAYATI 20150917...
Page 5
Instruction, single step Instruction must be followed in the order given Bullet points, such as Instruction, multiple steps Instruction can be carried out in any “•”, “_”, “ etc sequence → Instruction, multiple steps An action is required here NAYATI 20150917...
General Information of the Appliance Nayati Gas Teppanyaki Jumbo Grill is an excellent cooking appliance made by ¾” thick of stainless steel, highly polished steel plate. The power rate is 14 kW and 21 kW. Burner atmospheric supplied by a mixture of liquid gas and air or natural gas and air.
Important! Before installing, place the appliance on solid, flat, stable and horizontal surface and connection availability. Read this manual instruction carefully before using NAYATI Gas Teppanyaki Jumbo Grill. This appliance is for food preparation only. Below are safety instructions that strictly conformed: Improper installation, maintenance, cleaning, or modification to the appliance could lead to severe injury or death and could damage the appliance.
FRM-PDE-03-04 Gas -Oriental GB – Gas Teppanyaki Jumbo Grill Technical Data Data Table Table 1 Technical Specification of Gas Teppanyaki Jumbo Grill Technical Specification Model TP-JG-12/G 420 TP-JG-12/G P 420 Width Depth Height Width Depth Height Overall Dimension (mm) 1200...
Page 10
Natural Gas H, E Adjustable ∅ 2.05 mm ∅ 13 mm ∅ 0.35 mm Natural Gas LL Adjustable ∅2.2 mm ∅ 13 mm ∅ 0.35 mm Natural Gas L Adjustable ∅ 2.1 mm ∅13 mm ∅ 0.35 mm NAYATI 20150917...
FRM-PDE-03-04 Gas -Oriental GB – Gas Teppanyaki Jumbo Grill Data Plate Figure 1: Technical plate reports the current gas setting, nominal data, gases table, categories, and pressures for other CE countries. Fig. 1 NAYATI 20150917...
Page 12
FRM-PDE-03-04 Gas -Oriental GB – Gas Teppanyaki Jumbo Grill Figure 2: Technical Plate reports warnings in European languages and destined languages. Fig. 2 Figure 3: Technical plate reports warning and current setting on appliance packaging. Fig. 3 NAYATI 20150917...
Ring Label Api Model 1 GS.3720B Piezzo Electric Igniter dia.18mm GS.3720B-1 Ring for Piezo Igniter GS.3720B-2 Black Button Cover for Piezo Igniter GS.3682A Cable f/ Spark Plug 600mm GS.3856 Piezzo Sparking Plug GS.3851 Bunsen Pilot 3F/ 3H 0.20 LPG GS.3895B Thermocouple 600mm NAYATI 20150917...
Page 18
Ring Label Api Model 1 GS.3720B Piezzo Electric Igniter dia.18mm GS.3720B-1 Ring for Piezo Igniter GS.3720B-2 Black Button Cover for Piezo Igniter GS.3682A Cable f/ Spark Plug 600mm GS.3856 Piezzo Sparking Plug GS.3851 Bunsen Pilot 3F/ 3H 0.20 LPG GS.3895B Thermocouple 600mm NAYATI 20150917...
If there is no movement on the gas counter, it means no gas leakage. Before cleaning or maintaining the appliance, please isolate gas supply to the safe place. Install the appliance by following Safe International Gas Standards. WARNING! Do not use free flame to find gas leak! NAYATI 20150917...
Important! Make the daily check that the safety devices are properly install and in good working order. The appliance is equipped with the included or optional accessories. There is SS Handle for Griddle as included accessory. NAYATI 20150917...
Control the gas bottle (if any) placed correctly and protected in dry area. Check whether the gas pipes can easily inspected. If the pipes installed in floor and wall, make sure that this work done according to professional standard with reference points that make it possible to find the pipes. NAYATI 20150917...
3. If necessary, a pressure regulator must be installed. Once the pressure has been measured, disconnect flexible pipe “E”, retighten the screw cap of the inlet pressure point “C”. Restore all components inversely. NAYATI 20150917...
Make sure the diameter printed on each injector in 1/100 of a millimeter. Convert the appliance after turn the gas OFF and in UP position and let Gas Teppanyaki Jumbo Grill cool. Important! On completion of the operation, make sure that there are no gas leaks or malfunctions NAYATI 20150917...
Adjust nozzle (C) to make Main Burner ignite properly. Turn the nozzle clockwise to reduce gas flow. Turn anticlockwise to increase gas flow. c. When operated with Liquid gas, turn nozzle (C) clockwise toward stroke. After adjusting washer (11) and tightening cover screw (10). Fig. 12 Fig. 13 NAYATI 20150917...
Page 25
Fix the new seals on the regulated parts (Primary Air Bushes and Main Injector). Take pressure test of gas circuit and check for leaks. Properly control Gas Teppanyaki Jumbo Grill work according to these instructions. Please check main burners’ cross-lighting, stability, and flame factor. NAYATI 20150917...
Page 26
Take out the fat collecting drawer and take off the ABS knob. b. Remove the nozzle from the nozzle carrier and replace with the new one according to the destined country and gas type. c. Fix the nozzle by using non-hardening sealing tape. Fig. 15 NAYATI 20150917...
After using the Gas Teppanyaki Jumbo Grill, close the gas valve in UP position. Control Panel Description For example: TP-JG-12/G 420 and TP-JG-12/G P 420 Fig. 16 A1 : Gas Control Knob 1 to turn on-off the main burner 1...
When you want to start the appliance in the cold condition (like in the morning after along time for not being used), you have to wait at least two minutes before turning the main burners on. Therefore, thermocouple can warm up and provide the voltage needed for the valve work. Routine Cleaning and Maintenance NAYATI 20150917...
! If you find the lighting and control devices are difficult to use, please contact the manufacturer immediately, which will provide you necessary assistance or call NAYATI dealer. ! Please check the appliance periodically for 6 months. Contact your dealer that will supply assistance to repair and set interval.
Check and repair produce voltage (mV) Thermocouple dirty Check and clean Griddle leaves Black Particle Cleaning not done properly Repair re-season if possible otherwise replace Griddle are unused for a long griddle time and exposed to oxidation CE Certificate NAYATI 20150917...