Adjusting The Colors - Sanyo VPC-AZ3 Instruction Manual

Adjusting the colors

With the Real Color Equalizer, the hue, saturation and brightness values of
the primary colors of light (red [R], green [G], and blue [B]) are set
independently. Color adjustment can be performed using the 6-color mode or
the 12-color mode.
Adjusting the hue
1
Load the image data (see page 31).
œ
If using the color adjustment settings data that you created, load the
settings data (see page 32).
2
On the adjusted color selection panel, click on the color you wish to
adjust.
œ
When you click on the adjusted color selection panel, the panel's
outer frame and the coordinate points on the color space
coordinates panel are displayed clearly.
1
1
Selected coordinate point on the color space coordinates panel
2
Color selection panel for the color to be adjusted
3
Selected coordinate point on the brightness coordinates panel
3
Move the hue slider (use the mouse to drag it), to adjust the hue.
œ
When the slider is moved, the setting value to the right changes,
and you can preview the adjusted hue to the right of the original hue
on the color selection panel.
33
English
2
3