Hoover UH70905 Owner's Manual page 12

Carbon Filter • How to Clean
(Available on select models only).
Your Carbon Filter is located on the underside of
the Filter made with HEPA media.
• IMPORTANT- I
DO NOT RINSE OR WASH the Carbon Filter.
Cyclonic Filter Assembly:How to Clean
WARNING A
To reduce the risk of personal injury - Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
Remove dirt cup as described in Fig. 4.3.
4.9 Twist filter assembly (B) counter-clockwise.
Remove assembly from dirt cup (/_).
4.10 Dirt and debris can be cleaned from the filter
assembly with the Dusting/Upholstery Tool.
Place the filter assembly (4.9, I;',) on the dirt cup,
aligning (3) tabs on filter with (3) slots on dirt cup (/_)
and twist it clockwise to secure into position.
A
• IMPORTANT •
Filter assembly must be properly aligned to
dirt cup to function properly.
Replace dirt cup as described in Fig. 4.5.
BRUSHROLL: How to Clean
A CAUTION A
To reduce the risk of injury from moving parts -
Unplug before servicing.
4.11 Turn vacuum over so bottom side is facing up
and remove the (6) screws (A).
4.12 Pivot out bottom plate away from hidden latch
(B) and remove any debris and/or hair from the
brushroll.
4.t3 Reposition bottom plate, aligning latch (B) and
fastening all (6) screws (A). Press firmly at latch (B)
area to ensure that it is properly latched.
Actual model may vary from images shown. 12