Bake Function; Convection Cooking Function - Black & Decker TO6335BJP User Manual

• For your convenience, the unit always remembers the last selected setting unless
unplugged. You can change this setting before the oven begins preheating or once it
has reached the preset temperature and time.
• You cannot change the temperature or time during the preheat cycle. Once the set
temperature is reached, you can then change the temperature or time at any time.
• If using convection bake, remember to lower the suggested temperature of a recipe
or package by 25˚F.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
SLIDE RACK POSITIONS
There are four positions for the slide rack. It can be inserted in either the upper or
lower slot. It can also be inverted for two additional positions.
Position 1: Use upper slots along oven walls. Insert rack using a rack-up position.
Position 2: Use lower slots along oven walls. Insert rack using a rack-up position.
Position 3: Use upper slots along oven walls. Insert rack using a rack-down position.
Position 4: Use lower slots along oven walls. Insert rack using a rack-down position.

BAKE FUNCTION

Selecting Cooking Temperature and Time
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
Note: You have 10 seconds for selecting the temperature and time. If you exceed this
time, the display will change back to the default (000) temperature and time; simply
repeat steps 1-5 below to begin again.
1. Press BAKE button. The unit beeps, On indicator light blinks and 350°F (180°C)
default temperature flashes on the digital display.
2. To change the temperature, immediately press (▲) or (▼) button until you reach
desired temperature.
Note: Cooking temperature can be adjusted from 200˚F to 450˚F (93˚C - 232˚C).
• Tap button and release to change in increments of 5 degrees.
• Press and hold button to change rapidly in increments of 25 degrees.
3. To set the cooking time, press the TIMER button. If you just plugged in the unit, the
default cooking time of 0:30 (30 minutes) flashes on the display; otherwise it will
display the last selected time.
4. Immediately press (▲) or (▼) buttons to select desired time up to a maximum of 2
hours.
• Tap button and release to change in one-minute increments.
• Press and hold button, to change rapidly in 10-minute increments.
5. Once you have set desired temperature and time, press START/STOP button.
• Digital display flashes LO and PREHEAT until the unit reaches 150˚F then it
flashes temperature until the set temperature is reached.
6. Open oven door. Insert food to be cooked or heated in bake pan or pizza pan into
the oven.
7. Close oven door.
6
Important: You cannot change the temperature or time during the preheat cycle.
Once unit reaches selected temperature, then you can change them at any time.
For your convenience, the unit always remembers the last selected setting, unless
unplugged.
• When unit reaches set temperature, it beeps and display alternates between
temperature and time during the entire cooking cycle.
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
8. To open the oven door, use an oven mitt to grip handle and gently pull forward to
bring door down until it rests on the counter.

CONVECTION COOKING FUNCTION

The CONVECTION function uses an internal fan to distribute heat evenly. Use this
feature with the BAKE function.
1. To turn on the fan for convection cooking:
• After you have selected the desired temperature and time, press START/
STOP button then press the CONV button. You will hear the fan running and
the digital display shows the fan symbol throughout the cooking cycle.
• When baking using convection, the temperature selected should be 25
degrees lower than recommended temperature for conventional cooking.
• Watch cooking time as some foods will bake faster.
QUICK BAKE FUNCTIONS
These functions allow you to cook at preset cooking temperatures and times, or can
be adjusted as desired.
COOKIES FUNCTION (M)
Preset Temperature: 350˚F.
Preset Time: 12 minutes
Rack Position: 2 or 3. Place in the center of the oven.
1. To change the temperature, immediately press ▲ or ▼ buttons. Tap button and
release to change in increments of 5 degrees. Press and hold button to change in
increments of 25 degrees.
2. To change the time, press the TIMER button. Tap button and release to change
in one-minute increments. Press and hold button to change in 10-minute
increments.
3. Press START/STOP button.
• Digital display flashes PREHEAT until 150˚F temperature is reached;
temperature continues to increase until set temperature is reached.
• Once unit reaches set temperature, it beeps and display alternates between
temperature and time during the entire cooking cycle.
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. Open oven door using oven mitt or pot holder and carefully remove food.
7