Advertisement
These instructions are for your safety. Please read through them thoroughly before use and retain for
future reference-
Parts Description
Ref
Description
Indoor
A
Monitor
Wall
B
mounting
bracket
Wire
C
Connector
Before You Start
Check pack and make sure you have all of the part listed above. If not, contact your local
store who will be able to help you.
Safety & Operating Instructions
VIDEO DOOR PHONE
10.2" DIGITAL HANDSFREE COLOR
MONITOR NVX-1000
Illustration
Qty
1
1
1
Fittings Supplied
Ref
Description
D
Wall Plug
E
Screw
Accessory
F
Connector
Illustration
Qty
4
4
4
Page
1
Advertisement
Table of Contents
Summary of Contents for Navtex NVX-1000
- Page 1 Safety & Operating Instructions VIDEO DOOR PHONE 10.2” DIGITAL HANDSFREE COLOR MONITOR NVX-1000 These instructions are for your safety. Please read through them thoroughly before use and retain for future reference- Parts Description Fittings Supplied Description Illustration Description Illustration Wall Plug...
-
Page 2: Technical Characteristics
Technical Characteristics Specifications Indoor Unit! NVX-1000" Dimensions 300[W] x200 [H] x20 [D] mm Weight 1.2Kg DC14V (External Power Supply) Input Power Power Consumption Idle mode : 2W Operating : MAX 14W Connecting System 4 wires; 2 Cameras, 2 CCTV Cameras 2 Monitors... -
Page 3: Indoor Unit
Indoor Unit Monitor screen Talk on/Talk off (Monitor off) / Intercom on standby mode (Camera 1, 2 select) Mute on/off Melody Select Door Open CCTV 1, 2 select Microphone Menu: Brightness/ Contrast / Color / Backlight On/ Off 10. Adjust Down 11. -
Page 4: Wiring Diagram
-Assembly instructions- WIRING DIAGRAM Page... - Page 5 Page...
-
Page 6: Cable Connection
A) Cable connection 1. Connect the monitor to the camera with the cable according to the wiring diagram. 2. Carefully insert the wires to the terminal by pressing down the terminal flap with any small tool taking care that the 2 bare wires do not touch. Distance between the Panel and the Type of cable to use Monitor... -
Page 7: Working Time
IMPORTANT ! Depending upon the installation (1 or 2 viedo monitors) the position of the dip-switches on The back of each video monitor must be set correctly (see table below) Any changes to the position of the dip-swiches on either the main or optinal video monitor Will require the power suply to be disconnected for 30 seconds and then reconnected Operating Instructions 1. - Page 8 icon to end intercom conversation . There is approximately 120 seconds of time before the unit automatically shuts off. 5. Activation of Mute On/Off When target monitor’s status is mute on and Intercom function is activated, target monitor’s LED will flash between red and blue, without chime sound.
- Page 9 Button dims the LEDs backlights to prefered setting of dimness. When the monitor is on, button activates the menu for setting controls options of the screen brightness and contrast resolution for the picture color in view. By pressing the again, allows you to scroll through setting options.
-
Page 10: Troubleshooting
Troubleshooting Problem Check point No power Check to make sure the AC plug is firmly inserted into (no picture on monitor) the AC outlet. Check the all cable connections to ensure that all are firmly connected between the monitor and the camera. Power is on, but no picture Check the polarity of wires, they may not be correctly on the monitor...