Preparation Before Installation; Safety Suggestions; Safety Precautions For Installing The System; Safety Precautions For Removing - D-Link DES-7200 Hardware Installation Manual

DES-7200 Hardware Installation Guide
2
2.1

Safety Suggestions

To avoid personal injury and equipment damage, please carefully read the safety
suggestions before you install the DES-7210/7206.
Note
2.1.1 Safety Precautions for Installing the
System

Keep the chassis clean, free from any dust.

Do not place the equipment in a walking area.

Do not wear loose clothes or any other things that may be caught by the chassis during
installation and maintenance.

Turn off all power supplies and unplug all power cables before you can remove the
chassis.
2.1.2

Safety Precautions for Removing

The DES-7210/7206 is large and heavy. When you handle them, please pay attention to the
following requirement:

Avoid moving the equipment frequently.

At least two persons are needed to move the equipment. Do not attempt to move the
equipment by one person only.

Keep balanced in moving the equipment, and avoid injuring your leg and feet or
spraining your waist.

Turn off all power supplies and unplug all power cables before you can remove the
equipment.

First remove all the line cards, fan tray, and power module from the chassis before you
can move the DES-7210/7206 by using the handles on both sides, to avoid any
damage.

Preparation Before Installation

The following safety suggestions do not cover all possible dangers.
2-1