Memorising Only The Desired Stations; Receiving The Memorised Stations; Other Functions; Adjusting The Sound Characteristics - Sony XR-1780 Operating Instruction

Memorizing only the
desired stations
1
Select the desired band.
A MEM
TUNER
2
Tune in the station which you wish to
store on the preset number button.
3
Press and hold the desired preset
number button (
two seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
FM ST
GB
Up to 6 stations from each band (FM1, FM2, MW,
SW1, and SW2) can be stored on the preset
number buttons in the order of your choice (6
from FM1, 6 from FM2, 6 from MW, etc.).
If you try to store another station on a preset
number button, the previously stored station will
be replaced by the newly selected station.
Receiving the memorized
stations
1
Select the desired band.
A MEM
TUNER
2
Press the preset number button on
which the desired station is stored.
Note
If you press the preset number button for more
than two seconds, the currently received station
will be memorized. To receive the currently
memorized station, be sure to press the preset
number button and release quickly.
8
FM1 n FM2 n MWn SW1
n SW2 n FM1
ATA
to ) for about
1 6
FM1 n FM2 n MWn SW1
n SW2 n FM1

Other Functions

Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing the
SEL
VOL (volume) n BAS (bass)
n TRE (treble) n BAL (balance)
n FAD (fader) n VOL (volume)
2
Adjust the selected item by pressing
either the or
Adjust within three seconds after selecting.
(After three seconds the button will revert to
volume control.)
Enjoying bass and treble
at low volume

— Loudness Function

LOUD
Press the button. n "LOUD" will
appear on the display.
Bass and treble will be boosted. To cancel,
press again.
Attenuating the beep
sound
Press the button while pressing
5
the button.
SEL
To reactivate the beep sound, press these
buttons once more.
button repeatedly.
button.