Turning The Projector On; Switching Between Image Sources; Changing The Language Of The Projector Menus; Adjusting Image Position - Epson PowerLite Pro Z9870NL Quick Reference

Turning the Projector On

1. Turn on your computer or image
source.
2. Remove the projector lens cover.
3. Press the On button. After the
power and Status lights stay blue,
the projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User's Guide.
4. If your image does not appear, see

"Switching Between Image Sources"

or "Troubleshooting."
Changing the Language of
the Projector Menus
The default language of the projector's
menu system is English, but you can
change it as necessary.
1. Press the Menu button to acess the
projector's menu system.
2. Select Extended and press
3. Select Language and press
4. Select your language and press
5. When you're done, press Menu
to exit.
On button; just
.
.
.
Switching Between Image
Sources
Press the Search button or one of
the source buttons (remote control),
or one of the source buttons
(projector).

Adjusting Image Position

Press the Lens Shift button on the
remote control or projector until
Adjust Lens Shift is displayed on the
screen.
Press the arrow buttons on the
remote control or projector to adjust
the position.
If the projector is on a table, you can
level the image by turning any of the
projector's adjustable feet.