Page 2
Summary NEO I is the portable monitoring equipment with which SDI(SD/HD/3G) and HDMI(SD/HD/Full HD) is supported Input, output of SDI and HDMI channel consisted of 1 for each. And UP/DOWN/CROSS change is possible An integrity check to a signal and an audio level checking function in at most 8 channels are...
USER MANUAL Product Composition ‘ 1 of NEO main body 1 of adaptor...
Page 4
The name and the function of each product part Touch panel 5.0” View finder 1/4 Inch Multi connection hole(Top, Bottom, Left, Right) Source In Audio Jack Multi-Controller Signal converted out...
USER MANUAL The standard and the performance Physical Size (W x H x D) 138.5 x 87.9 x 22 (mm) weight 325 g Supply Power + 12 VDC Power Consumption 9 Watts (Maximum: 10Watts) Operation temperature 0℃ ~ 70℃ humidity 0% ~ 95% RH, Non-condensing Digital Video Specs ...
Page 7
USER MANUAL Use method 1. Menu explanation When a menu button is pressed for more than 2 seconds and a touch screen is pushed, the menu is indicated IN/OUT : The kind of input signals and the resolution of the output signal and the pattern can be setup 2.
2. The addition menu explanation 2.1 IN/OUT INPUT : The signal which consists of SDI, HDMI, Pattern, AUTO and inputs can be chosen The order of priority to AUTO is SDI > HDMI > Pattern OUTPUT : It's possible to setting the output resolution and the kind of patterns can be chosen When pressing a SET button after choosing the output format, it's applied Test pattern...
Page 9
USER MANUAL 2.2 Measure Waveform : It can be indicated to choose YCbCr or RGB waveform at the bottom left Measure Window : It can be indicated to choose Audio, Vector scope, Cable length or Jitter on window in split mode...
Page 10
1) Audio level display It is indicated to at most 8 channels Indication by a video input source It is indicated as the dbFS reference 2) Vector Scope It is indicated as the vector scope 3) Length (Option) ...
Page 11
USER MANUAL 2.3 Config LCD Bright : The brightness of the LCD screen can be controlled LCD Contrast : Contrast of a LCD screen can be controlled Audio Volume : The volume of sound output by a terminal of earphones can be controlled ...
Page 12
2.5 STATUS An audio signal (1 Group 1,2 Channel L/R Signal) is indicated Audio L/R level bar Display (1 Group L/R Signal) Input battery capacity indication (4 step) Auto OFF Activating/deactivating Icon Input selection AUTO function Activating/deactivating Icon Input source kind(SDI, HDMI, Pattern) display icon Input resolution indication Direction of conversion indication Resolution of output...
USER MANUAL 3. Monitoring information display An input source and input format information are indicated When pressing a reset button, an error count and Run time are initialized When an error occurs by item, it is count and displayed Display sequence of an execution time is day, hour, minute, seconds ...