Auto Changeover Operation; Lh (Low Heating) - LG LAN180HYV1 Owner's Manual

Auto Changeover operation

Single zone wall mounted models
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±4 °F (2 °C).
|
1
Press to turn on the power.
f
2
Press repeatedly until
on the display screen.
G H
3
Press or to set the desired tem-
perature between 64 °F (18 °C) and 86 °F
(30 °C).
g
4
Press repeatedly to select the fan
speed.
!
NOTE
This function may not be supported,
depending on the model.

LH (Low Heating)

This function operates the heating system to
maintain a minimum indoor temperature and
prevent indoor objects from freezing in a
situation where there is no permanent resi-
dent, such as a vacation home.
1
C
is displayed
2
3
ADVANCED FUNCTIONS
Turn the air conditioner on.
f
Press repeatedly to select the Heating
Mode.
Press for 3 seconds.
- is displayed on the display screen.
!
NOTE
• is activated in Heating Mode only.
• When function is set, the indoor unit
maintains operation mode (Fan speed is
high and the vane is set maximum
angle) and room temperature between
48 °F~55 °F (9 °C~13 °C), and display
desired temperature display on the
indoor unit display as
heating)
• During operation, when you press
g
buttons such as ,
seconds, and then return to
[heating / previous temperature / pre-
vious fan speed].
M
• If is pressed during
end function and immediately execute
Power Heating. (only for power heating
model)
• In case an error occurred, operation can
be interrupted for the protection of the
product.
15
. (LH = Low
_
f
, or for 3
operation,