NETGEAR ProSafe Plus User Manual page 9

Note: If the Resource CD home page does not display, your PC may have the Autorun feature disabled. You
can enable your PC's Autorun feature or use the PC's file manager to navigate to the CD and double
click on Autorun.exe.
Note: The name of the utility may vary slightly for different ProSafe
The utility uses two network programs, WinPcap and Adobe AIR to process network commands. If not
already installed on your PC, these two programs will also be installed. They will be placed in your program
directory.
4. Click Install Utility. This will create a NetGear subdirectory under the \Program Files directory on
your PC. Installation then copies the utility program into the \Program Files\NetGear\ProSafe Plus
Utility directory and places a utility icon (
5. The WinPcap and Adobe AIR programs can be used by other network applications and may already be
installed on your PC. If so, a message will be displayed asking if you want to reinstall WinPcap. Click
Cancel unless you think the installed WinPcap is an older version or might be corrupted. Clicking
Cancel will end the WinPcap portion of installation and will continue installing the remaining
components.
6. If the Adobe AIR program is already installed, an already installed message will be displayed. Clicking
Close will end the Adobe AIR portion of installation.
7. When the InstallShield Wizard Complete screen displays you can check a box to launch the utility
following installation. If you do not want to launch the utility at this time, just click Finish.
8. Installation is complete. If you checked the "Launch following installation" box, the utility will
automatically start. If not, you can launch the utility by clicking on the utility icon on your desktop.
Getting Started
ProSafe Plus Switch Configuration Utility User Guide
®
Autorun
) on the PC desktop.
v1.0, February 2010
Plus switch models.
®
1-3