FUTABA 4pls Instruction Manual page 95

Hide thumbs Also See for 4pls:
Table of Contents

Advertisement

FUEL DOWN TIMER function
Fuel down timer function
- This function is primarily used to check the refueling time of a gasoline
car. (The remaining time is displayed.)
- Each time the switch is pressed, the timer is restarted and the set time is
reset. The start time becomes the alarm set time. (When counted down to
00 minute 00 second, the down timer becomes an up timer.)
- The down timer can be initially started by throttle trigger.
- The passing of time is indicated by sounding of a buzzer (beep) each
minute after starting.
- Alarm
:A beep sounds at the set time (minute).
- Prealarm :Alarm advance announcement sound. Beeping begins 5 seconds before the alarm.(beeps)
- After starting, the timer continues to count even if the LCD switches to another screen.
Lap timer function
- Each lap time can be memorized by switch operation. (100 laps)
- The race time can be set. Switch operation after the time set by alarm
has elapsed automatically stops the timer. The passing of time is indicat-
ed by sounding of a buzzer (beep) each minute after starting.
-Alarm
:Beep sounds at the set time.
Prealarm
:Alarm advance announcement sound. Sounding begins 5 seconds before
the alarm. (beeps)
- The lap timer can be initially started by throttle trigger.
(LAP TIMER operation)
- The lap timer is started by switch or throttle trigger.
- Number of laps (LAP): After starting, the timer is counted up and the lap time blinks for 3 seconds
each time the switch is pressed. To prevent erroneous counting, switch operation is not accepted
during this period. When 1 lap exceeds 10 minutes, counting is repeated from 0.
- Lap list: Up to 10 lap times are memorized beginning from lap list 1. After lap memory "No.100", op-
eration returns to lap memory "No.1" and the lap memories are overwritten.
- The lap time data memorized in the lap memories can be checked with the lap list screen (p.92). The
entire lap list data is cleared the next time the lap timer is started.
- TIME: For the first 3 seconds, the preceding lap time is displayed. After that the current lap time is
displayed.
LAP TIMER
Timer Function "TIMER"
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents