Deactivating The Rf Transmitter; Restoring Factory Default Settings; Troubleshooting - DirecTV C66RBX User Manual

Table of Contents

Advertisement

DIRECTV RC65RBX.fm Page 22 Wednesday, May 5, 2010 6:25 PM
2. Write down the last six digits of the RID number.
3. Slide the mode switch to DIRECTV, AV1, or AV2.
4. Press and hold the MUTE and SELECT keys at the same
time until the green light under the selected switch
flashes twice, then release both keys.
5. Using the number keys, enter 9 6 1. (The green light
flashes twice.)
6. Press and release
twice.)
7. Using the
number
RID number. (See step 2 above.)
8. Press and release the SELECT key. (The green light
flashes twice.)

Deactivating the RF Transmitter

To deactivate the RF transmitter on your DIRECTV Remote
Control, perform the following steps:
1. Slide the mode switch to DIRECTV, AV1, or AV2.
2. Press and hold the MUTE and SELECT keys at the same
time until the green light under the selected switch
flashes twice, then release both keys.
3. Using the number keys, enter 9 6 1. (The green light
flashes twice.)
4. Press and release
four times
.)
The RF transmitter on your remote control is now
deactivated. To reactivate the RF transmitter, See
"Activating the RF Transmitter" above.

RESTORING FACTORY DEFAULT SETTINGS

To reset all the functions of the remote control to the
factory defaults (the original, out-of-the-box settings),
follow these steps:
Press and hold the MUTE and SELECT keys at the same
1.
time until the green light flashes twice, then release
both keys.
Using the number keys, enter 9-8-1. (The green light
2.
flashes 4 times.)

TROUBLESHOOTING

PROBLEM: Light at the top of the remote blinks when you
press a key, but the component does not respond.
SOLUTION 1: Try replacing the batteries (see page 7).
SOLUTION 2: Make sure you are aiming the DIRECTV
Universal Remote Control at your home entertainment
component and that you are within 15 feet of the
component you are trying to control.
PROBLEM: The DIRECTV Universal Remote Control does
not control component or commands are not recognized
properly.
CHAN
. (The green light flashes
keys, enter the last six digits of the
CHAN
. (The green light flashes
22 22
®

Advertisement

Table of Contents
loading

Table of Contents