Intermittent Wi-Fi; Netflix Problems; Getting Remote Support For Your Tv; How Does Remote Support Work? - Samsung UN40JU6500 User Manual

Ultra high definition 4k
Hide thumbs Also See for UN40JU6500:
Table of Contents

Advertisement

intermittent
Wi-Fi
• Check the distance between the TV and the Modem/Router. The distance should not exceed SOft (15.2 m).
• Verify that there are no obstacles between the TV and the Modem/Router.
(The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)
• Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see
if
it
is
in good condition. If it is not, replace the cable.
• Connect the TV to your Modem/Router using a CAT
7
cable and try to set up a wired network connection.
(MENU > Network> Network Settings).
• Check Network Status (MENU> Network> Network Status) to
see
if the IP address is invalid, for example,
169.x.x.x. If it
is,
call your ISP to get a valid IP address, and then ask them to check the connection not only
between your Modem and Router but also between the Modem
I
Router and the Internet.
• If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the
Mac addresses of your new Modem/Router and the TV.
Netflix problems
• Change the DNS to
8.8.8.8.
Select MENU >Network> Network Status> IP Settings> DNS setting> Enter
manually> DNS Server> enter 8.8.8.8 > OK
• Verify that the ESN for Netflix is valid. (Go to MENU >Support> Contact Samsung)
Reset Netflix by
selecting
MENU> Smart Hub> Reset Smart Hub.
Smart
Hub
error
messages
• Reset Smart Hub by selecting MENU> Smart Hub> Reset Smart
Hub.
• Update the
TV's
software
(MENU>
Support> Software Update).
Getting remote support for your TV
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who
can
remotely:
• Diagnose your TV
• Adjust the TV
settings
for you
• Perform a factory reset on your TV
• Install recommended firmware updates
How
does remote
support work?
You can easily have a Samsung Tech remotely
service
your
TV:
1.
Call the Samsung Contact Center and ask for remote
support.
2.
Open the menu on your TV and
go
to the Support section
.
3.
Select Remote Management, then read and agree to the service
agreements.
When the PIN
screen
appears, provide the
PIN
number to the agent.
4.
The agent will
then
access your
TV.
That's it!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents