Troubleshooting For Anynet - Samsung DM65E-BC User Manual

Troubleshooting for Anynet+

Problem Possible Solution
Anynet+ does not work. •
•
•
•
•
•
•
•
I want to start Anynet+. •
•
I want to exit Anynet+. •
•
•
The message "Disconnecting •
Anynet+ device ..." appears on
•
the screen.
The Anynet+ device does not •
play.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (initial setup)
If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn
your product off and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product and check if the
On in the System menu.
Press the TOOLS button to display the
Select View PC in the Anynet+ menu.
If using the remote control, press SOURCE on the remote control and select a device that is not an Anynet+
device.
If using touchscreen control mode, touch and hold on the screen when the product is turned on to display the
administrator menu. Select Source
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+ configuration or has finished switching to
Anynet+.
You cannot use the play function when initial setup is in progress.
On in the System menu.
Anynet+ menu and select a menu you want.
from the administrator menu.
Anynet+ (HDMI-CEC) is set to
153