To Fire The Flash Intentionally - Nikon Lite Touch Zoom 140ED Instruction Manual

To fire the flash intentionally

Use this mode to intentionally fire the flash without regard to light
conditions.
1. Press the
LCD panel.
Lite Touch Zoom 140ED
2. Check that the orange and green LEDs light up,
then shoot.
While the orange LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot be
released. Lightly press the Shutter Release button again, and release
the shutter after the orange LED stops blinking and stays lit.
Pressing down on the popped-up flash unit will prevent the flash from
firing. Do NOT touch the flash unit.
34
Advanced Operations
Anytime Flash mode
button until " " appears on the
Lite Touch Zoom 140ED QD
Example