Pioneer XR-A670 Service Manual page 3

IMPORTANT
THIS PIONEER APPARATUS CONTAINS
LASER OF CLASS 1.
SERVICING OPERATION OF THE APPARATUS
S H O U L D B E D O N E B Y A S P E C I A L L Y
INSTRUCTED PERSON.
LABEL CHECK (For MYXJ and NVXJ Types)
Printed on the Rear Panel
LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER: 5 mW
WAVELENGTH: 780 nm to 785 nm
1. Laser Interlock Mechanism
2. When the cover is opened, close viewing of the objective
∗
: Refer to page 66.
XR-A670, XR-A370
NVXJ Type
MYXJ Type
MYXJ Type
Additional Laser Caution
The position of the switch (S9501) for detecting loading
state is detected by the system microprocessor, and
the design prevents laser diode oscillation when the
switch (S9501) is pressed physically.
Thus, the interlock will no longer function if the switch (S9501)
is released physically and deliberatery.
The interlock also does not function in the test mode
Laser diode oscillation will continue, if pin 1 of
CXA1821M (IC8101) on the CD ASSY mounted on the
$M Loading Mechanism assembly is connected to GND,
or else the terminals of Q8101 are shorted to each other
(fault condition).
lens with the naked eye will cause exposure to a Class
1 laser beam.
∗
.
3