Installing Software; Connecting To Your System; Updating Your Printer Firmware - Epson SureColor S-Series Setup Manual

Installing Software

Insert the software CD that came with your printer into your computer and follow the on-screen
instructions.

Connecting to Your System

You can use USB and/or Ethernet network connections.
For USB connection, make sure your system has the appropriate port and that you have a standard,
shielded cable, 10 feet (3 m) long or less.
Note: Do not connect the printer until a software installation screen prompts you to.
To connect to a network hub, or directly to your computer's network interface, you need a standard RJ-45
CAT-6 network cable.
Make sure the printer is turned off.
1.
Plug the interface cable into the appropriate port on the printer.
2.
Plug the other end of the cable into the appropriate port on your computer or network switch or hub.
3.
Route the interface cable through the cable support on the printer stand along with the power cords, as
4.
shown on page 17.

Updating Your Printer Firmware

To keep your printer features and functionality up to date, you should check for a new version of firmware
on the Epson support site and update your printer, if necessary.
Installing Software |
39