Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pyle PLCMDVR15
Summary of Contents for Pyle PLCMDVR15
-
Page 2: Table Of Contents
Table of Contents 1. Notes ........................2 2. Production Specification ..................2 3. Instructions for I/O Alarm Input and Output ............. 3 4. Instructions for Remote Control ................4 4.1 Description of Remote Control Buttons .............. 4 4.2 Soft Keyboard Input Description ................. 4 5. -
Page 3: Notes
1. Notes 1.1 Definitions of connectors for aviation interfaces: 1 red: +12V positive pole 2 black: common GND 3 white: audio 4 yellow: video 1.2 Definitions of power cords: Red: DC12V or 24V input Black: ground GND Yellow: ignition wire GND 1.3 Do the following to properly start the machine: 1. -
Page 4: Instructions For I/O Alarm Input And Output
2.1 Definitions of Front and Back Panels Front panel: PWR for power indication, REC for video indication, SD1 for SD card indication, and IR for infrared receiver. Back panel: POWER for DC12/24 power input, USB for mouse operation, I/O for alarm input and output interface, AV1--AV4 for audio and video input, Video out for video output and Audio out for audio output. -
Page 5: Instructions For Remote Control
4. Instructions for Remote Control 4.1 Description of Remote Control Buttons 4.2 Soft Keyboard Input Description Characters that can be input into the system include numbers, upper/lower case English letters and Chinese characters. Pinyin input for Chinese characters is available by shifting “pinyin/ABC”... -
Page 6: Vcr Instructions
5. VCR Instructions The items are capable of the following functions: <Video retrieval>: search the stored video files in the hard disk/SD card and playback these files; <Video setting>: set the audio and video parameters, operating modes, etc; ... -
Page 7: Preview Interface
5.2 Preview Interface Figure 1 Monitor screens of recording with a card and prompt for no card, respectively Figure 2 Monitor display of “INFO” The preview interface will display information about the working status of the equipment and of the channels. The information is shown in the following manner: [2011-8-31 09:54:34] shows the system time [CHx] is channel name [●... -
Page 8: Video Retrieval
5.3 Video Retrieval Figure 3 Diagrams of video retrieval • The video retrieval interface provides retrieval, playback and backup of the video files stored in the disk. • Available retrieval methods include fast and accurate time orientation, browsing of recording status in a given time period, and browsing of specific video files. 5.3.1 Instructions for Detailed Files and Backup Figure 4 Interface of detailed files Detailed files are arranged based on channel order or video chronological order for easy... -
Page 9: Video Setting
2. Play mode control provided, including: normal play, single-frame play, play in slow motion, fast forwarding and rewinding. Volume adjustable. 5.4 Video Setting 5.4.1 Frame Rate Dynamic Configuration Figure 5 Video setting screen 1. The video setting interface provides setting for video mode, as well as the setting of audio and video parameters for each channel. -
Page 10: Small Bit Stream Configuration
the video file when videoing. 8. <Video mode>: videoing upon startup or timer videoing, optional. Videoing upon startup (default): to start video recording upon startup. Timer videoing: the button <configuration of time section for videoing> will pop up for configuration of the time section. ... -
Page 11: Time Setting
<Esc>: Esc from the features setting interface and return to the main menu interface. 5.5.1 Time Setting 1. The time setting interface is for the setting of the system time. It includes the following specific items: <System date>: set the year, month, day. ... -
Page 12: Storage Device Management
3. Formatting of the storage device (SD card/hard disk). 4. Formatting of the backup device (SD card/USB disk). 5. Customer setup of the normal videoing days to be covered to keep the alarm videos for possible maximum days. 5.5.3 Instructions for Equipment Maintenance and System Upgrade Description: 1. -
Page 13: System Information
1. Camera mode: modified as required by the camera mode (<PAL> is the default mode in the system); 2. Channel polling time: set the channel polling time; 3. Set the system language (see the figure below). Note: When the modified system setting is saved, the system will automatically restart. 5.6 System Information 5.7 Vehicle Information The items are capable of the following functions:... -
Page 14: Startup/Shutdown Setting
5.7.1 Startup/Shutdown Setting Description: 1. Startup/shutdown mode: ignition mode, timing mode and startup/shutdown mode are shifted by pressing the ENTER key. Ignition mode is the default mode in the system (it means that the VCR will start when the car is started; timing mode means the VCR will start at the time specified by the user.) 2. -
Page 15: Display Setting
5.8 Display Setting 1. Channel name: the name of the channel can be modified; 2. Location of the name: set the location where the name is displayed in the preview interface; 3. Color setting: set the color and contrast of channel monitor screen; 4. - Page 16 channel where remote 3G view is required must be on. The user may debug the resolution (CIF or QCIF) and frame rate of the channel according to the scene. Main page - vehicle management - wireless setting: wireless Internet access needs to be set on.
- Page 17 Attachments: MDVR Specification Item Equipment parameter Performance indicator System Operation language English/Chinese/Traditional Chinese/other Equipment parameters Graphical menu interface (OSD menu) Password security Two-level management of user password administrator password Video Video input 4-channel composite video input Video output Single-channel composite video output Video display Single-picture and quad-picture...
- Page 18 Software kit Playback analysis Play back the video file on PC analyze vehicle information in the file Software upgrade Upgrade file This equipment supports SD Table 1: MDVR Specification MDVR basic electric parameters: Item Equipment Performance indicator parameter Power input 8-36V Input voltage between +8V and +36V;...