Pro 7900 and 9900 Field Repair Guide
4. Measure the pattern.
5. Input the measurements.
5.5 Navigate to
SELF TESTING\Mecha Adjustment\Feed Adj\Input:
5.6
Input the value that was measured
Feed Adj(ustment)
Measure the distance between the 2 horizontal lines.
Note: The Feed Adjustment for the 7900 and 9900 is
in the preceding step. (nn.n)mm: Press the
Printer Component,
Software Item,
based on
990.6mm
Printers).
Press the
LCD Display,
Printer Button
(not 980.0 mm like other
Right
Arrow.
OK
button.
10/6/10
Page 301.