Enabling/Disabling The Program Change Map Settings (Midi Map Select) - Boss gt-8 Owner's Manual

Hide thumbs Also See for gt-8:

Table of Contents

Chapter 8 Using the GT-8 with External MIDI Devices Connected

5. Repeat Step 4 as needed, setting patch numbers to their

corresponding Program numbers, until the Program

Change Map is completed.

6. Press [EXIT] to return to the Play screen.

Enabling/Disabling the Program Change

Map Settings (MIDI Map Select)

This setting determines whether patches are switched

according to the Program Change Map settings, or to the

default settings.

fig.08-251

1. Press [SYSTEM], then press PARAMETER [

[

] so that "MIDI: Map Select" is displayed.

fig.08-240d

2. Rotate the PATCH/VALUE dial to select "Fix" or

"Prog."

Value

Explanation

Switches to the patches according to the

Fix

default settings. For more on the default

settings, refer to p. 90.

Switches to the patches according to the

Prog

Program Change Map.

3. Press [EXIT] to return to the Play screen.

]

Table of Contents