Sony STR-DE695 Service Manual page 2

STR-DE695
Ver 1.1
Models of area code TW
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
120 W + 120 W
2)
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
1)
FRONT : 140 W/ch
1)
CENTER : 140 W
1)
SURR : 140 W/ch
Models of area code AUS
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(8 ohms 1 kHz, THD 0.7 %)
120 W + 120 W
Reference Power Output 2)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT 1) : 100 W/ch
CENTER 1) : 100 W
SURR 1) : 100 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT 1) : 140 W/ch
CENTER 1) : 140 W
SURR 1) : 140 W/ch
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
110 W + 110 W
2)
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
1)
FRONT : 130 W/ch
1)
CENTER : 130 W
1)
SURR : 130 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
E2, E3, JE, AUS 240 V AC, 50 Hz
SP, MY, AEP, UK, 230 V AC, 50 Hz
AR, CH
TW 110 V AC, 60 Hz
US, CND, MX 120 V AC, 60 Hz
3) Measured under the following conditions:
Area code Power requirements
CH 220 V AC, 50 Hz
Frequency response
MULTI CH IN, 10 Hz – 70 kHz
CD/SACD, AUX, +0.5/–2 dB (with sound
MD/TAPE, DVD, field and equalizer
VIDEO 1, 2, 3 bypassed)
Inputs (Analog)
MULTI CH IN, Sensitivity: 500 mV
CD/SACD, AUX, Impedance: 50 kilohms
MD/TAPE, DVD, S/N 4) : 96 dB
VIDEO 1, 2, 3 (A, 500 mV
4) INPUT SHORT (with sound field and equalizer
bypassed).
5) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
VIDEO 2, CD/SACD, Sensitivity: –
MD/TAPE (Optical) Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT), Voltage: 500 mV
VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms
SUB WOOFER, Voltage: 2 V
SURR BACK (Except for Impedance: 1 kilohms
models of area code US,
CND)
2
2)
2)
2)
2)
5)
)
Outputs (Digital)
MD/TAPE (Optical) Sensitivity: –
EQ
Gain levels: ±10 dB, 0.5 dB step
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency 10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1710 kHz
With 9-kHz tuning scale: 531 – 1710 kHz
Models of area code E2, E3, JE
With 10-kHz tuning scale: 530 – 1610 kHz
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code AEP, UK, SP, MY, CH, TW, AUS
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code AR, MX
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna Loop antenna
Intermediate Frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
6) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1 . All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video (Except for models of
area code AEP, UK):
Y: 1 Vp-p, 75 ohms
P /B-Y: 0.7 Vp-p, 75 ohms
B
P /R-Y: 0.7 Vp-p, 75 ohms
R
Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video (Except for models of
area code AEP, UK):
Y: 1 Vp-p, 75 ohms
P /B-Y: 0.7 Vp-p, 75 ohms
B
P /R-Y: 0.7 Vp-p, 75 ohms
R
6)
6)
6)
6)