General; Description And Location Of Parts - Sony STR-K7000 Service Manual

STR-K7000
Getting Started

Description and location of parts

Receiver
Front panel
1 2 3
?/1
MULTI CHANNEL DECODING
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE TUNING 2CH
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
w; ql qk qj qh qg qf
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
About the indicators on the display
1 2 3 4 5 6
SP A ; DIGITAL ; PRO LOGIC II DTS
LFE
SW
SP B SLEEP OPT COAX HDMI
L C R
SL S SR
qd qs qa
qf
qg
Name Function
A SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 64).
E ;PRO
Lights up when the receiver
LOGIC (II) applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. "; PRO
LOGIC II" lights up when the
Pro Logic II Movie or Music
decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
4
SECTION 1

GENERAL

4 5 6 7 8
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
A.F.D. MOVIE MUSIC MULTI CH IN MUTING
qd qs qa q; 9
Name Function
A ?/1
Press to turn the receiver on
or off (page 29, 37, 38, 53,
79).
B SPEAKERS
Press to select OFF, A, B,
(OFF/A/B/A+B)
A+B of the front speakers
(page 30).
C Display
The current status of the
selected component or a list
of selectable items appears
here (page 7).
D MULTI
Lights up when multi
CHANNEL channel audio is decoded
DECODING (page 38).
lamp
continued
5 US
7
CAT
MEMORY
D.RANGE STEREO MONO
q; 9
8
Name Function
F DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 64).
G MEMORY
Lights up when a memory
function, such as Preset
Memory (page 55), etc., is
activated.
H Preset
Lights up when using the
station
receiver to tune in radio stations
indicators you have preset. For details on
presetting radio stations, see
page 55.
I Tuner
Lights up when using the
indicators receiver to tune in radio stations
(page 53), etc.
J D.RANGE
Lights up when dynamic range
compression is activated (page
40).
K HDMI
Flashes when you select
"HDMI A." in the VIDEO
menu (page 65).
L COAX
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to "COAX IN" (page 64).
continued
7 US
Name Function
E Remote sensor
Receives signals from
remote commander.
F DISPLAY
Press to select information
displayed on the display
(page 67).
G INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 64).
H MASTER
Turn to adjust the volume
VOLUME
level of all speakers at the
same time (page 34, 35,
37, 38).
I MUTING
Press to mute the sound
(page 35).
J MULTI CH IN
Press to select the audio
directly from the
components connected to
the MULTI CH IN jacks
(page 35).
K INPUT
Turn to select the input
SELECTOR
source to playback (page
35, 37, 38, 54, 56, 64, 66,
68).
L MOVIE,
Press to select sound fields
MUSIC (MOVIE, MUSIC) (page
50).
M A.F.D.
Press to select A.F.D.
mode (page 48).
N 2CH
Press to select 2CH
STEREO mode (page 52,
53).
O TUNING +/–
Press to scan a station
(page 54, 55).
P TUNING MODE
Press to select the tuning
mode (page 56, 79).
Q MEMORY/ENTER Press to store a station or
enter the selection when
selecting the settings
(page 29).
6
US
Name Function
M OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to "OPT IN" (page 64).
N SLEEP
Lights up when the sleep timer
is activated (page 67).
O Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
L
Front Left
R
Front Right
C Center (monaural)
SL Surround Left
SR Surround Right
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
L C R
SL SR
8 US
This section is extracted
from instruction manual.
Name Function
R VIDEO 3 IN/
To connect a camcorder or
PORTABLE AV IN video game (page 27, 35).
jacks
S AUTO CAL MIC
Connects to the supplied
jack
ECM-AC2 optimizer
microphone for the Auto
Calibration function (page
31).
T PHONES jack
Connects to a headphone
(page 75).