Before You Begin - D-Link DWL-3140AP Quick Install Manual

Please read the following before you begin:
1. Do not operate the DWL-3140AP access point near unshielded
blasting caps or in an otherwise explosive environment unless the
device has been modified for such use by qualified personnel.
2. Do not touch or move the DWL-3140AP access point when the
antennas are transmitting or receiving.
3. Do not hold any radio device so that the antenna is very close to
or touching the face, eyes, or other exposed body part while the
device's radio antenna is transmitting.
4. Before using a wireless device in a hazardous location, consult
the local codes, national codes, and safety directors of the
location for usage constraints.
5. Do not connect or disconnect cables or otherwise work with the
DWL-3140AP access point hardware during lightning storms.
6. The DWL-3140AP access point is intended for indoor use only.
Do not install the device outdoors.
7. To reduce the possibility of connection interference caused by
dust, clean the CAT 5 connector pins before inserting a cable
into an DWL-3140AP access point.
D-Link DWL-3140AP Hardware Installation Guide

Before You Begin

4