Panasonic NV-SJ422EE Service Manual page 3

Turn on the Service Mode
1.Press the FF key and the
EJECT key simultaneously for
more than 3 seconds.
Activate the Service Mode 2
2.While keep placing FF key,
press the EJECT key in twice.
Activate the Entering Mode.
3.Press the EJECT key for more
than 3 seconds.
Set the Mode 2.
4.Press the CH UP key in twice.
Display the Setting Code.
5.Press the POWER Button to
turn the power on.
Enter the Model and Option Code.
6.Set the applicable Model and Option code by using
REW, PLAY, STOP and FF keys on the Remote
Controller. (See Fig.S1 & S2)
Exit from Service Mode.
7.Press the POWER Button to
turn the power off.
8. Press FF and EJECT keys
simultaneously in 6 times.
Model No.
NV-SJ422EE 38 / (26h) 8 / (08h)
http://cxema.ru
PROCEDURE
Model Option
Code Code 1
F.I.P. DISPLAY
(Colon starts
flashing)
(Normal Indication)
Fig.S1 Service Secreen (sample)
Option Option
Code 2 Code 3
244 / 6 / (06h)
(F4h)