Rio Ultrasonic Facial User Manual page 6

Cleanser

Hide thumbs Also See for Ultrasonic Facial:

CHARGING

Before using for the first time, charge until the red charging light goes out. This may take up to 8 hours depending on the

state of charge. When the battery is low, the unit will beep 6 times and then automatically turn off.

Connect the charging adapter to the charging socket and plug into the mains.

When the unit is charging, the battery indicator light will illuminate red.

When the unit is fully charged, the battery indicator light will go out and your product is ready to use.

After charging is complete disconnect the charging adapter from the unit and unplug from the mains.

YOUR ULTRASONIC FACIAL

™