Upgrading the software
USB upgrade
You can upgrade the software by using USB Memory Stick,
t
Connect your USB Memory Stick with the upgrade file to the USB
terminal on the side of yourT_.
i
lii
_-
to select Software update, then press OK.
3
to select USB, then press OK.
4
to select your desired USB port, then press OK.
5
to select the desired Update file.
6
Use _11_ to select Yes, then press OK.
7
Read the on-screen instructions and confirm that you want to
continue with the installation,
8
When the software upgrade is completed, press (_ to set the unit
to go into Standby mode, then remove the USB Memory
Stick.
9
Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
t 0 Press (_ again toTurn the unit On.
• TheTV starts up with the new software,
For further
assistance, please contact Call Center.
Network update
You can update the software by connecting the unit to the Intemet.
t
Use A T to select Software update, then press OK.
_-
Use A T to select Network,
then press OK.
3
Use _11_ to select Yes, then press OK.
• This unit will then start cheddng for the latest firmware
version.
4
Confirmation
message will appear.
Use _11_ to select Yes, then press OK.
• The unit will start downloading
the latest firmware
version.
• The unit will start updating the firmware
version.
• It may take a while to complete the updating.
When the software update is complete, press IO to make sure the
unit goes to Standby mode.
6
Unplug the AC power cord for a few seconds from AC outlet and
plug it again,
7
Press _ again toTurn the unit On.
• TheTV starts up with the new software.
For further
assistance, please contact Call Center.
•
in order
to upda±e software
via the Intemet,
you must connect
the unit to the Jnternet
and set up necessary
settings, Network
settings
assistant
uli_ p.40 Network
uli_ p.40
•
Please do not unplug the AC power
cord
or [themet
cable while
executing
the
Network
update.
• All settings will remain the same even if you upda±e the software
version,
• The version
of Net service will also be updated
if newer
version
of Net service is
available
when upda±ing the firmware.
Automatically
check
for latest
software
This function lets you know if the latest software is available while the
unit is connected to the Internet.
t
Use A Y to select Automatically
check for latest software, then
press OK.
_-
Use A T to select the desired option, then press OK.
Off
Disable automatically
check for" latest software.
On
A message vdll appear" ifther'e
is the latest software
on the
network
server
Netflix
deactivation
Displays the deactivation
setting for Netfiix.
t
Use A T to select Nedlix
deactivation, then press OK.
_-
Use A T to select the desired option, then press OK.
Yes
Deactivate the connection to Netflix.
No
Activate the connection to Netflix.
Netflix ESN
Displays the ESN information.
t
Use A T to select Nedlix
ESN,then press OK.
• Displays the ESN (Electronic Serial Number) to get any services
from Netflix.
VUDU
deactivation
Displays the deactivation
setting forVUDU.
t
Use A T to select VUDU
deactivation, then press OK.
2
Use A T to select the desired option, then press OK.
Yes
Deactivate the connection toVUDU.
No
Activate the connection toVUDU.
YouTube
deactivation
Displays the deactivation
setting forYouTube.
t
Use A T to select YouTube deactivation, then press OK.
_-
Use A T to select the desired option, then press OK.
Yes
Deactivate the connection to You[ube.
No
Activate the connection toYou [ube.
Hulu Plus deactivation
Displays the deactivation
setting for Hulu Plus.
t
Use A T to select Hulu Plus deactivation, then press OK.
_-
Use A T to select the desired option, then press OK.
Yes
Deactivate the connection to Hulu Plus.
No
Activate the connection to Hulu Plus,