AUTOMATIC DIALING
Speed Dialing
1) Lift the handset, or press the SP-PHONE button.
2) Press the Auto/Store button, then press the station number. (01 to 20)
3) Speak to the other party.
One-Touch Dialing
1) Lift the handset, or press the SP-PHONE button.
2) Press the Direct Call button.
3) Speak to the other party.
n
To change a stored number, repeat the steps of "Storing Phone Numbers".
If the batteries are not installed, programming and speakerphone operation can
n
not be done.
Correcting an Error while Storing
Press the PROGRAM button if you notice an error.
Repeat all the steps of "Storing Phone Numbers" to reprogram.
n
Erasing Stored Numbers
Example: To erase the number in memory station 02: Be sure that the handset is
on the cradle and the SP-PHONE indicator is off and the batteries are installed.
1) Press the PROGRAM button until the STORE indicator light is on.
2) Press the Station number 02.
3) Press the AUTO/STORE button.
4) Press the PROGRAM button.
The STORE indicator light goes out.
n
NOTE: If the number that you want to erase is stored in a direct call button, press
That button on step 2 of the above procedure.
10