Table of Contents
Advertisement
Connections / Initial Setup (Ready to Play)
Make all cable or antenna connections before plugging into an AC outlet.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
Connecting (Select a method)
For ANT./Cable ➛ ➛ ➛ ➛ ➛ VCR ➛ ➛ ➛ ➛ ➛ TV
Connect cable from
1
Antenna/Cable to VCR's IN
FROM ANT. jack.
2
Connect VCR's OUT TO TV
jack to TV's ANT. IN jack
with included RF Cable.
For DSS/Cable Box ➛ ➛ ➛ ➛ ➛ VCR ➛ ➛ ➛ ➛ ➛ TV
Connect your cable box's OUT
1
jack to the VCR's IN FROM
ANT. jack with an RF cable.
2
Connect VCR's OUT TO TV
jack to TV's ANT. IN jack
with included RF Cable.
Initial Setup (Ready to Play)
1
Turn TV on and tune to channel 3.
2
Plug VCR Power Cord into AC wall outlet.
VCR comes on and auto channel and clock
set starts.
• If screen below does not appear...
check all connections.
Try tuning TV to channel 4.
• To change VCR's output channel,
see "VCR's Output Channel" (p. 12)
in Advanced Operations book.
Plug VCR Power plug into an AC wall outlet.
CH AUTO SET PROCEEDING
CANCEL : STOP
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
If you use a cable box, turn it on and set it to
the Public Broadcasting Station (PBS) channel
in your time zone. If you use a DSS receiver, it
must be turned off.
Notes
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT
on remote or STOP twice on VCR.
Then make settings manually.
(See Advanced Operations book, p. 12.)
• If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually.
(See Advanced Operations book, p. 12.)
VCR
TV
VHF/UHF
TV
VCR
2
VHF/UHF
Over tightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
3
Settings are made automatically.
When complete, this screen appears.
If " AUTO CLOCK SET IS INCOMPLETE"
appears, manually set clock (below).
AUTO CLOCK SET
IS I NCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACT I ON KEY
Manual Clock Set
If Auto Clock Set was incomplete.
1
Press ACTION* on remote to display
CLOCK menu.
1 / 1/2004
- - - - - - - - -- - - - - - - -- - - - - -
SELECT :
END
2
Press
to select the month and
In the same manner, select and set the
date, year, time, and DST (Daylight Saving
Time).
6 /20/2004
- - - - - - - - -- - - - - - - -- - - - - -
SELECT :
START
3
Press ACTION to start clock and exit.
- 4 -
IN FROM ANT.
1
IN from
ANT./CABLE
OUT TO TV
2
IN FROM ANT.
Cable TV
Converter Box
1
OUT TO TV
SET CLOCK
-
THU--
12:00PM
DST : ON
SET :
: ACT I ON
SET CLOCK
-
SUN-
1 5:30PM
DST : ON
SET :
: ACT I ON
IN from
ANT./CABLE
to set.
Hide quick links:
Advertisement
Table of Contents
