Table of Contents
Advertisement
*Important: If a remote control button does not work when pressed, press
When playing back a recording which has been
marked using the
can either set VCR to automatically advance through
marked commercial blocks, or set it so that
commercials are only skipped on your command.
1
VCR
C / A
CLOCK
REPEAT PLAY
:OFF
T I ME STAMP
:ON
REMOTE WARNING
:ON
AUTO SHUT- OFF
:OFF
AUTO VCR/TV
:ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH
:3
SELECT :
EXIT
: ACT I ON
2
VCR
C / A
CLOCK
SET UP COMMERCIAL ADV.
C/A RECORD
:ON
C/A PLAYBACK
:AUTO
SELECT :
EXIT
: ACT I ON
3
VCR
C / A
CLOCK
SET UP COMMERCIAL ADV.
C/A RECORD
:ON
C/A PLAYBACK
:AUTO
SELECT :
SET :
EXIT
: ACT I ON
AUTO
: VCR will automatically advance through
marked commercial blocks recorded on the
tape and then resume playback.
MANUAL : VCR will advance through commercials only
when CA/ZERO is pressed. Playback will
resume when the end mark of a commercial
block is found, or a new recording or blank
portion is detected, or after 8 minutes.
Press ACTION again
4
to return to normal screen.
Notes
• The selection mode in step 3 remains set unless there is a power outage in which case the
original factory setting will be restored.
• If playback is started in the middle of a commercial, only a single commercial is shown, or an
individual commercial is longer than 1 minute, the commercial may not be skipped.
Press FF to quickly advance through the commercial.
• Part of a recorded program may be skipped over if the program portion between commercials
is less than 1 minute or there are frequent dark and quiet scenes during the program. To view
the portion of tape being incorrectly skipped, press PLAY while the VCR is skipping, reverse
the tape to a point just prior to where the skipping began and press PLAY again. This time the
group will not be automatically skipped. Automatic skipping will be re-enabled when the end of
the marked group is detected.
the VCR button on the remote and try the button again.
Playback
feature, you
Press ACTION
CH
to display menu.
Press
CH
to select C/A and
display SET UP
COMMERCIAL ADV.
Press
CH
to select C/A PLAYBACK
and press
"AUTO" or "MANUAL".
to set
registered trademarks of SRT, Inc.
A Jerry lggulden invention licensed
in association with Arthur
D. Little Enterprises, Inc.
PLAY
SELECT/
SET
:PLAY
:STOP
:FF
:REW
ACTION
CA/ZERO
and
are
U.S.Pat. No. 5,333,091;
5,692,093; 5,696,866
other patents pending
FF
27
Advertisement
Table of Contents
