Advertisement
Step2. Firmware Update with the USB Memory Drive
9. It is safe to remove the USB Memory Drive after the TV turns on.
5. The TV will begin scanning
the USB Memory Drive.
6. A message will appear asking
if you want to perform the firmware
update.
Select "OK" and then press the
"Enter" button on the remote control.
7. The firmware update will start.
This should take 3 min to 5 min.
!!! Do not disconnect
the USB Drive during this step
!!! Do not unplug the power cable
or turn the TV off.
8. After completing the firmware
update, the TV will turn off in
3seconds and turn back on.
Advertisement
