Britax PRIMO BASE User Instructions page 35

Table of Contents

Advertisement

GB
Tension the vehicle seat belt
Pull on the diagonal belt section
tension the entire vehicle seat belt.
Keep the vehicle seat belt tensioned.
At the same time, push the carry-cot
seat surface and against the backrest of the
vehicle seat.
Caution! The buckle of the vehicle seat belt
10
must not be positioned in the belt guide
12.
Pull the carry-cot 05, to check that it is securely
installed.
Caution! Regularly check that the carry-cot
is securely installed 05. Always re-tension
the vehicle seat belt if the carry-cot
worked loose after prolonged use.
Fastening clip
In addition, clamp both belts on the side
of the buckle of the vehicle seat belt
into the fastening clip 14.
User instructions
13
to
05
onto the
05
has
10
NL
Spannen van de autogordel
Trek aan het schoudergedeelte
de autogordel, om de hele autogordel
aan te spannen.
Houd de autogordel strak aangetrokken.
Druk hierbij de base
05
rugleuning van de autostoel.
Let op! Het slot van de autogordel
geen geval over de gordelgeleider
Trek aan de base 05, om de vaste inbouw te
controleren.
Let op! Controleer reglmatig de vaste
inbouw van de base 05. Span de autogordel
altijd opnieuw aan, als de base
een langere gebruiksduur wat losser komt te
zitten.
Bevestigingsklem
Klem eerst de beide gordels aan de
zijde van het slot van de autogordel
in de bevestigingsklem
Gebruiksaanwijzing
13
van
op de zitting en tegen de
10
mag in
12
liggen.
05
tijdens
10
14
vast.
DE
DE
GB
GB
NL
FR
34

Advertisement

Table of Contents
loading

Table of Contents