Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Audiovox Prestige P-945WESP
Summary of Contents for Audiovox Prestige P-945WESP
- Page 1 P-945WESP P-945WESP P-945WESP P-945WESP P-945WESP TUNE/ SKIP/ TRACK AM/FM/MPX RADIO WITH DETACHABLE FRONT PANEL, COMPACT DISC PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK Released 7-9-03. Revision A: 8-22-03 Incorporated panel/display changes OWNER'S MANUAL 128-6862A 1 of 16...
-
Page 2: Table Of Contents
INDEX Page Operating Instructions ... 3 - 9 Specifications ... 10 CD Changer Controls ... 11 Setting the Clock ... 12 CD Player Error Codes ... 13 CD Changer Error Codes ... 13 Care and Maintenance ...14 Notes on Discs ...15 Electronic Skip Protection ...15 Warranty ... -
Page 3: Operating Instructions
OPERATING INSTRUCTIONS 3,4,5,6,7 1 1 1 1 1 POWER ON/OFF BUTTON Press this button to turn the unit on or off. If the unit is off and the ignition switch is "on", the time of day will be displayed. Also, when the ignition switch is on, the unit will turn on automatically when a disc is inserted, or when any panel button is pressed. - Page 4 ADJUST Volume buttons are used to select the desired beep tone function. BEEP OFF indicates no beep tones. BEEP 2ND indicates a tone will sound when a secondary function button is pressed, such as BAND/LOUD, and BEEP ALL indicates a tone will sound whenever a button is pressed.
- Page 5 9 9 9 9 9 AUDIO MUTE (MUTE) This button is used to mute the volume from the system. By pressing the button, a flashing MUTE indication will appear on the display panel and the volume will be muted. Pressing the MUTE button again, or any other panel button, will return the volume level to the setting in use before the Mute function was activated.
- Page 6 station is now set into that preset memory position. The station can now be recalled at any time by pressing that button. 4. Repeat the above procedure for the remaining pre-sets on that band and for the other 3 bands on the unit. bp bp bp bp bp LIQUID CRYSTAL DISPLAY PANEL FUNCTIONS The Liquid Crystal Display (LCD) panel displays the frequency,...
- Page 7 bu bu bu bu bu REPEAT PLAY SELECTOR (RPT) During disc play, press this button to repeat the play of the selected track (S--RPT will appear on the display panel). Play of the track will continue to repeat until the button is pressed again and the S--RPT indication disappears from the display panel.
- Page 8 cq cq cq cq cq EQUALIZER SELECTOR (P.EQ) The P.EQ button applies preset sound effects to the unit’s audio output signal. The P.EQ button, when pressed, will activate one of the following operating modes: CLASSICS, POP M, JAZZ, FLAT,or DSP OFF. If the bass and treble levels are changed when the P.EQ function is active, as displayed on the panel, the equalizer function automatically reverts to the FLAT setting.
- Page 9 dn dn dn dn dn RESET BUTTON A RESET button is located on the front of the chassis (front panel must be removed to access the button). The RESET circuitry is provided to protect the microprocessor circuitry and should only be activated under the following circumstances as it will erase the time and pre-set memories: 1.
-
Page 10: Specifications
SPECIFICATIONS Size: Operating Voltage: Output Power: Output Wiring: Output Impedance: Low-Level Output: Tuning Range: Sensitivity: FM Stereo Separation: CD Frequency Response: CD Signal/Noise Ratio: CD Channel Separation: CD Distortion: *Specifications are subject to change without notice. 7" W 2" H 6-5/8"... -
Page 11: Cd Changer Controls
CD CH NGER CONTR Built into this radio are controls to operate an optional CD changer. Please check with your Rampage/Audiovox car stereo specialist or call 1-800-645-4994 for recommendations of the models that will work with this radio. Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play. -
Page 12: Setting The Clock
of the selected disc will continue ( DSN will disappear from the display panel). The Disc Scan mode will also be canceled by activating the (Repeat Play or Shuffle Play functions). du du du du du DISC/TRACK REPEAT PLAY (RPT) When the Repeat button is pressed, the RPT indication will appear on the display panel and play of the selected track will be continually repeated until the Track Repeat mode is canceled... -
Page 13: Cd Player Error Codes
CD PL A A A A A YER ERR CD PL CD PL CD PL CD PL If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. -
Page 14: Care And Maintenance
CARE AND MAINTENANCE The radio section of your new sound system does not require any maintenance. We recommend you keep this manual for reference on the many features found in this unit as well as how to set the clock. The compact disc player section also requires no routine maintenance, but proper understanding of its use and handling will help you obtain maximum enjoyment of its capabilities. -
Page 15: Notes On Discs
NOTES ON DISCS Attempting to use non-standard shape discs (e.g.; square, star, heart) may damage the unit. Be sure to use round-shape CDs only in this unit. NOTES ON CD-Rs (Recordable CDs)/CD-RWs (Rewriteable CDs): 1. Be sure to use discs with the following marks only for play in this unit: 2. - Page 16 CD changers, power amplifiers, equalizers and accessories. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.