Application; Battery Removal/Installation - Hitachi C 18DSL Handling Instructions Manual

English
4. Dust Collector Set
The dust collector collects sawdust when the
vacuum cleaner is attached to the power tool.
(How to attach the dust collector)
Unscrew the M4 screw attaching the cover
using a Phillips screwdriver and remove the
cover (Fig. 9).
Attach the dust collector to the power tool with
the M4 screw (Fig. 10).
Connect the vacuum cleaner to the dust
collector.

APPLICATION

Cutting various types of wood.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the
battery latches to remove the battery
(see Fig. 11, 12).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its
polarities (see Fig. 12).
Ventilation holes
Latch
Rechargeable battery
Handle
Pull out
Insert
34
Cover
Fig. 9
Dust collector
Screw
Fig. 10
Terminals
Battery cover
Fig. 11
Latch
Push
Rechargeable
battery
Fig. 12
Screw