Setup Menus; System - Panasonic AJ- DCP Operating Instructions Manual

Setup Menus

SYSTEM

Item
Superimposed
No.
display
12 SYS H (HD)
14 SYS SC (SD)
15 SYS H (SD)
18 SCH COAR (SD)
19 SCH FINE (SD)
20 AV PHASE
The underlining denotes the factory mode.
<Note>
Items No.12 to No.20 are not initialized even when the initialization operation is conducted.
Setting
Superimposed
No.
display
0550 –550 For adjusting the system phase of the HD SDI output (in 27 ns steps).
: : –: The phase is moved ahead.
1100 0 +: The phase is moved back.
: :
1650 550
0000 –108 For adjusting the system phase of the VIDEO output and SD SDI output.
: : (Total variable range: ±180 degrees or more)
0108 0 –: The phase is moved ahead.
: : +: The phase is moved back.
0216 108
0000 –429 For adjusting the system phase of the VIDEO output and SD SDI output.
: : (in 74 ns steps)
0429 0 –: The phase is moved ahead.
: : +: The phase is moved back.
0858 429 <Note>
While the value is being adjusted, the sound output will be muted; however
this is normal and not indicative of a problem. When the adjustment is
finished, sound will be output.
0000 0 For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
0001 90 output. (4 positions at 90-degree increments)
0002 180 The SC phase is changed, and the H phase remains unchanged.
0003 270
0000 –32 For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
: : output. (Variable range of ±45 degrees or more)
0032 0 The SC phase is changed, and the H phase remains unchanged.
: : Use together with No.18 SCH COAR (SD) to cover ±180 degrees.
0064 32
0000 –100 For adjusting the phase of the AUDIO output with respect to the VIDEO
: : output (in 20.8 µs steps).
0100 0 –: The audio output phase is moved ahead of the video output.
: : +: The audio output phase is moved back from the video output.
0200 100
24
Description of setting