Table of Contents
Advertisement
FEATURES
(
ELECTRONIC
TIME-OF-DAY CLOCK
AND TIMER
If your range is equipped with a digital
clock and timer, it will either be design
1 or design 2. Follow the instructions
for the illustration that matches the
clock on your range.
DESIGN 1
DESIGN 2
When range is firstconnectedtopower
TO SET A TIMING OPERATION FOR
or if power is interrupted, 12:00 wilt
LESS THAN ONE HOUR: Press and
flash in the display,
hold MIN button until desired time ap-
pears inthedisplay. Timer will immedi-
(_
(_
TO SET CLOCK: Slide switch up to
ately begin counting down as soon as
CLOCk<SET
m,NUTE
TIMER
CLOCK position,
the MIN button is released.
HOUR
CLOCK
8[
12
DD
I_
_
TO SET A TIMING OPERATION FOR
88:88 willflash in the display when
ONE TO "I3NO HOURS: Press the
range is first connected to power or if
HOUR button. (1:59 will appear in the
power is interrupted.
display.) Select desired minutes by
MZ'N
TZHE_
pressing and holdingMIN button. Tim-
If
ing wil[ begin when button is releasec
TO SET CLOCK: Press and hold
Pressand hold HOUR button until cor-
Two hours is the maximum timing that
CLOCK SET button while turning MIN-
rect hour appears in the display,
can be se_
UTETIMER knob to the correct time-
of-day. MINUTE TIMER knob can be
turned in either direction.
Press and hold MIN button until the
TO CANCEL M NUTE T MER OP-
correct minutes appear in the display.
ERATION OR STOP "END-OF-
TO SET MINUTE TIMER: Turn MIN-
TIME" BEEPS: Slide switchup to the
UTETIMER knob to the right, to the de-
clockposition+Time-of-daywilt reap-
sired time, up to 60:00 (1 hour). Timer
TO SET MINUTE TIMER: Slide switch
pear in the display.
down to TIMER position. The timer will
will begin counting down after a few
automatically begin counting down
seconds delay. When time has lapsed,
from 1 hour in increments of one min-
a continual beep will sound for up to 2
ute.
IMPORTANT
minutes.
HOUR
___r,7_
The timing operation will be can-
8
0
59t1_
_
cetled if the switch is moved tO the
PressCLOCK SET buttOnt° stOpbeep
CLOCK pos tion+
seunas. The correct time-of-day will
reappear in the display.
MI"N
TIHER
TO CANCEL A TIMING OPERA-
TION: Turn MINUTE TIMER knob to
(0:59) will be displayed as soon as the
the left, until 00:00 appears in the dis-
switch is moved to the TIMER posi-
play. The correct time-of-day will re-
tion.)
appear in the d sp ay after a few sec-
onds delay.
To check time-of-day during a timing
operation, press and hold CLOCK SET
button. Time will reappear in the dis-
play.
-4-
Advertisement
Table of Contents
