Check the generator on a firm, level surface with the engine stopped.
Be sure to block the wheel with the two wheel stoppers provided.
Maintenance Lid Opening and Closing
To open
1.
Remove the flange bolt from the bottom of the maintenance lid.
2.
Align the maintenance lid knob OPEN and pull up the lid.
3.
Pull the stopper from the holder and set the stopper to the hook to
hold the lid.
To close
1.
Lift the maintenance lid slightly to unhook the stopper.
2.
Set the stopper in the holder on the maintenance lid and gently
lower the lid.
3.
Align the maintenance lid knob with CLOSE and fix the lid.
Keep the maintenance lid closed while operating the generator, or the
cooling efficiency is reduced, resulting in a damaged generator.
MAINTENANCE LID
STOPPER
HOOK
5.
PRE-OPERATION CHECKS
FLANGE BOLT
CLOSE
KNOB
HOLDER
OPEN
OPEN
CLOSE
19