Specifications - Teac AG-7D Service Manual

Amplifier Section
Output Power ........................................................100 W + 100 W
(Stereo, 0.2 % THD, 20 Hz to 20 kHz, 6 Ω)
Surround Output Power ..................................125 W per channel
(0.7 % THD, 1 kHz, 6 Ω, only one channel driven)
Total Harmonic Distortion ................0.09 % (at 95 W, 1 kHz, 6 Ω)
Audio Input Sensitivity/Impedance ..............*LINE: 200 mV/47 kΩ
Output Level/Impedance (TAPE REC) ..................200 mV / 2.2 kΩ
Frequency Response ................*LINE: 20 Hz to 50 kHz, +0 / –3 dB
Signal-to-Noise Ratio ....................................*LINE: 90 dB (IHF-A)
Tone Control ............................................BASS: ± 10 dB at 100 Hz
Digital Audio Section
Sampling Frequency ..................32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Digital Input Level ................................COAXIAL (75 Ω): 0.5 Vp-p
OPTICAL (660nm): –15 dBm to –21 dBm
Video Section
S-Video output
Y (luminance) - Output level ..............................1 Vp-p (75 Ω)
C (color) - Output level................................286 mVp-p (75 Ω)
Jacks ..................................................................S-VIDEO jack
Video output
Output level ........................................................1 Vp-p (75 Ω)
Jacks ..........................................................................RCA jack
Component video output (Y, P
Y-Output level..................................................1.0 Vp-p (75 Ω)
P , P -Output level ..........................................0.7 Vp-p (75 Ω)
B R
Jacks ........................................................................RCA jacks
FM Tuner Section
(Without notes 100.1 MHz, 65 dBf)
Tuning Range ....................87.5 MHz to 108.0 MHz (50 kHz steps)
Total Harmonic Distortion (1 kHz) ..............................Mono: 0.5%
Frequency Response ..................................30 Hz to 15 kHz, ±3 dB
Stereo Separation (1 kHz)......................................................40 dB
Signal-to-Noise Ratio ................................................Mono: 70 dB
AM Tuner Section
Tuning Range ..........................522 kHz to 1,611 kHz (9 kHz steps)
Usable Sensitivity ............................................................500 µV/m
Total Harmonic Distortion ..................................1.5% at 100 dB/m
Signal-to-Noise Ratio ........................................40 dB at 100 dB/m

1 SPECIFICATIONS

120W + 120W (6 Ω, JEITA)
160 W per channel (6 Ω, JEITA)
TREBLE: ± 10 dB at 10 kHz
, P )
B R
Stereo: 0.8%
Stereo: 65 dB
General
Power Requirements ..........AC 220 V, 50 Hz (China/Korea model)
Power Consumption ................................250 W (STANDBY : 3 W)
AC Outlet ....................................................................switched x 1
Dimensions (W x H x D) ................................435 x 143 x 372 mm
Weight (net) ........................................................................10.4 kg
Standard Accessories
Power Cord x 1
AM Loop Antenna x 1
FM T-type Antenna x 1
FM Matching Transformer x 1
Remote Control Unit (UR-426) x 1
Battery (AAA, R03, UM-4) x 2
Owner's Manual x 1
* LINE means CD, TAPE, VIDEO.
• Design and specifications are subject to change without notice.
• Weight and dimensions are approximate.
−2−
AC 230 V, 50 Hz (Europe/Australia model)
(except Australia model, total 100 W max.)