Field Of Use; Measuring Signals - Siemens 7KG6000-8AA Operating Instructions Manual

1.3 Field of use

The universal transducer is designed for acquisition of all the
important measuring signals in any kind of power system. It is
used, e.g., in the field of power supply where measuring signals
are transferred over long distances and made available to several
applications.
Each one of the analog outputs can be assigned any measuring
signal (current, voltage, active/reactive/apparent power, ...), as
well as any measuring range. Every output can be connected to
several devices, e.g. recorders, indicators, controllers, telecontrol
units, or process computers.
An impulse output can be used as a limit monitoring indicator or
for power measurement.
Inputs and outputs, as well as the auxiliary power supply are
electrically isolated.
0 to 20 mA, ±20 mA, 4 to 20 mA, ±10 V, and 0 to 10 V can be
selected as output signals.

1.4 Measuring signals

Current, voltage
Active/reactive/apparent power
Frequency
Power factor
Phase angle
Energy pulses, limit signal
8 SIMEAS E50417-K109U-C322-A1