Location Of Controls; Adjusting The Ringer Volume; Connecting A Communication Device - Panasonic KX-T7710 Quick Reference Manual

The KX-T7710 has two modes, NORMAL Mode and Panasonic PBX Mode*.
Please use the corresponding side of the Telephone Card depending on the mode.
*The PBX Mode may not be available depending on the
Telephone Systems to which you are connected.
For more detail, please consult your dealer.
NORMAL mode PBX mode
4
3
2
1
Confirming the Mode
You can confirm the current mode by the position of the Mode switch
lever (at the bottom of the unit). [Default: NORMAL]

Adjusting the RINGER Volume

Adjust the RINGER volume selector lever (at the bottom of the unit) to
the desired setting. (
[Default: MIDDLE]

Connecting a Communication Device

To connect a communication device such as a computer modem
to the telephone line, please use the DATA PORT (at the right
side of the unit). RJ11

Location of Controls

NORMAL Mode
Message/Ringer Lamp: Flashes when you receive a call or when
someone has left you a message.
One-touch Buttons (M1-M5): Used to
access a feature or
dialling button.
PAUSE: Used to insert a pause when
storing a telephone number.
AUTO: Used for Station Speed dialling.
PROGRAM: Used to enter the
programming mode.
MESSAGE: Used to call back the party who left the message
waiting indication.
Handset Volume Control Buttons: Used to adjust the handset volume.
FLASH/RECALL: Used to
PBX feature (eg., Hold, Transfer, or Three-party Conference).
8
REDIAL: Used to redial the last dialled number.
7
6
Telephone Card: Has two sides (NORMAL mode, PBX mode).
5
– LOW, – MIDDLE,
modular jack.
– 5 –
model of the Panasonic KX series Business
as a speed
send a recall signal in
– HIGH)
PBX Mode
One-touch Buttons
(1-8): Used as preset
feature buttons
set at the Panasonic
KX series Business
Telephone System; you
do not need to program
at your extension.
order to access a
DATA PORT