Advertisement
CD CH
CD CH
CD CHA A A A A NGER CONTR
NGER CONTR
NGER CONTROL OL OL OL OLS S S S S
NGER CONTR
CD CH
CD CH
NGER CONTR
Built into this radio are controls to operate an optional CD changer.
Please check with your Rampage/Audiovox car stereo specialist or call
1-800-645-4994 for recommendations of the models that will work
with this radio. Connection between the radio and CD changer is made
using the supplied ISO-to-DIN 8-pin adapter cable, Part Number
P956CDC.
To CDC Cable
Connector
8-Pin Adapter Cable
2
3
1
4
1
CD Left Input (Wht)
2
+12 Volts Acc (Yel)
3
CD Data Bus (Brn)
4
CD Audio Grd (Shld)
8
5
5
Data Bus Grd (Shld)
7
6
6 CD Right Input (Red)
DIN Connector
7
Control Voltage (Blk)
8
CDC On (Grn)
Once the changer is installed and properly connected, it may be
necessary to press the RESET button behind the radio front panel to
initialize the complete installation.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operate in the same manner as they do for radio
play. The following controls will operate the CD changer when it is
installed and connected to this radio. Refer to the owner's manual
included with the CD changer for instructions on the installation and
correct loading and use of the CD magazine.
CD CHANGER PAUSE/PLAY SELECTOR (
During radio, or CD player operation, press the MODE button to select
operation of the CD changer. CDC will appear, disc play will begin, the
disc and track number will be shown on the display panel, and the disc
icon (
into the changer, play will begin from the first track of the first disc in the
magazine. If a magazine was already in the changer, play will resume
from the track on the disc previously in play.
To Radio CDC
Connector
During CD changer play, pressing the PAU button once will stop changer
play; PAUSE will appear on the display and the disc icon will remain
stationary. To resume disc play, press the PAU button again and disc
play will resume from the point at which it was interrupted.
2
1
3
&
1
These buttons are used to select the desired disc for play. To advance
2
to a higher number disc, press the CD+ button
4
5
3
number disc, press the CD- button
will be shown on the display panel.
4
5
6
7
8
This button is used to quickly select the beginning of a particular track.
6
ISO Connector
With each momentary press of the Forward Track Select button (
7
the next higher track number will be selected as shown on the display
8
panel. Similarly, with each momentary press of the Backward Track
Select button (
FOWARD/REVERSE SEARCH (CUE/REVIEW)
High-speed audible search to any forward or reverse section of the
disc can be made with this feature. Press and hold the forward (cue)
button (
and hold the reverse (review) button (
reverse (backward) direction. In either case, the disc icon will rotate
faster when search is active.
-12-
) will become animated. If a new magazine has been loaded
DISC SELECT (CD+/CD-)
.
TRACK SELECT (
/
), the next lower track number will be selected.
) to advance rapidly in the forward direction, or press
PAU
)
.
To return to a lower
The number of the disc in play
)
),
) to advance rapidly in the
128-6838
12 of 16
Advertisement
