Nikon KEYMISSION 170 Quick Start Manual page 28

Inserting the Battery in the Remote Control
Insert a 3V CR2032 lithium battery.
Use a coin (1) to turn the battery-chamber cover counterclockwise (2) and open
it.
Insert the battery with the positive side face up (3). Make sure that the battery is
firmly inserted at the center of the battery chamber (4).
Align the N mark of the battery-chamber cover with the R mark of the remote
control (5), and press the battery-chamber cover with your thumbs (6). The
battery-chamber cover rotates clockwise slightly and stops (7).
Use a coin to turn the battery-chamber cover clockwise (8) to securely lock it.
Make sure that the X mark of the battery-chamber cover is aligned with the R
mark of the remote control (9).
Make sure that no foreign substance such as lint is caught in the battery-chamber
cover. Failure to observe this precaution could impair the waterproof performance
and cause water to seep inside the remote control.
16
Using the Camera