Wi-Fi/NFC
Sending selected images ([Send Images Stored in the Camera])
1
Select the menu.
[Wi-Fi] >
2
Select [Home] or [External].
3
Select [Via Network] or [Direct], and connect.
•
4
Select a device you want to connect.
•
5
Select [Single Select] or [Multi Select].
•
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
2 Select [OK].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Downloaded from
www.Manualslib.com
[New Connection]>[Send Images Stored in the Camera]>[AV
device]
When [External] is selected, [Direct] cannot be selected.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
(P287)
To change the setting or disconnect, press [Wi-Fi].
•
The setting is canceled when the picture is selected
again.
•
The number of pictures that can be sent by [Multi
Select] is limited.
manuals search engine
(P280)
(P245)
263