Pairing Bluetooth devices: Make sure the other devices are set to be discovered. From
●
Bluetooth settings, tap the device name in "Available devices" and follow the prompts.
Depending on the device, you may be required to enter or accept a passkey.
If the target device does not appear, tap Scan to search again.
This setting is available when Bluetooth is enabled.
●
Change the name of a paired device: From Bluetooth settings, tap Settings
device name, tap Rename, enter a new name, and tap OK.
Emoji cannot be used in a device name.
This setting is available when Bluetooth is enabled.
Canceling pairing: From Bluetooth settings, tap Settings
●
then tap Unpair.
This setting is available when Bluetooth is enabled.
●
Enable service from paired device: From Bluetooth settings, tap Settings
device name, and then tap the listing under Profiles.
If a confirmation prompt appears, follow the prompts.
This setting is available when Bluetooth is enabled.
This setting is available when the paired device is providing a service.
Tap the setting to toggle On/Off.
Search for other devices: From Bluetooth settings, tap Scan.
●
This setting is available when Bluetooth is enabled.
●
Check files received using Bluetooth transfer: From Bluetooth settings, tap More options
Received files, and then follow the prompts.
Connections Settings
next to a paired
next to a paired device name, and
next to a paired
>
218